Song Maker

Audio Spectrum Analyzer

See every frequency in a sound as it plays, from your microphone or an audio file, with the loudest one and its note. Free, in your browser, with no sign-up.

Turn on the microphone or open an audio file.

Peak
—
Note
—
Level
—

Display

FFT size

How to use the spectrum analyzer

It listens to your microphone or plays a file from your device. Nothing is uploaded.

  1. Choose the sound

    Press “Microphone” and allow the microphone, or press “Audio file” and pick a song or a recording. A file starts playing at once.

  2. Watch the spectrum

    Low frequencies are on the left and high ones on the right; the taller the shape, the louder that frequency is.

  3. Read the peak

    Under the spectrum are the loudest frequency, its nearest note and its level. “Freeze” stops them so you can read them, and “Peak hold” keeps the highest level each frequency reaches.

How to read a spectrum

Across, the scale is logarithmic: every octave gets the same width, so the bass has as much room as the treble. From 20 to 200 Hz takes as much space as from 2,000 to 20,000 Hz.

Up is the level in decibels below the loudest a recording can hold, so the numbers are negative and closer to 0 means louder.

A single steady tone is one narrow spike. A sung or played note is a row of spikes: the note itself and its overtones above it. Noise, such as wind, a fan or a cymbal, is a wide hill with no spikes.

The settings

  • Peak hold

    Draws a line at the highest level each frequency has reached. Play a whole song or sweep a tone, then see where it got loudest. Turning it off clears the line.

  • Freeze

    Stops the spectrum and the readings where they are, so you can study them. The sound goes on; turn it off to follow it again.

  • FFT size

    How much sound each measurement takes. A larger size splits the spectrum into narrower bands, so close frequencies separate, but it follows changes more slowly. At the default size, a band is about 6 Hz wide.

  • Smoothing

    Blends each measurement with the ones before, so the spectrum moves calmly. Lower it to see quick changes, such as drum hits.

The frequency bands and what's in them

Sound engineers split the spectrum into bands like these. The edges vary from one source to another, but the picture is the same.

RangeWhat you hear there
Sub-bassRange20–60 HzWhat you hear thereFelt more than heard: the deepest thump of a kick drum, the sub-bass of EDM and hip-hop, rumble.
BassRange60–250 HzWhat you hear thereBass guitar, the body of a kick drum and the lowest notes of low voices. Too much sounds boomy.
Low midsRange250–500 HzWhat you hear thereThe warmth of most instruments, and where a mix turns muddy when too many of them pile up.
MidsRange500–2,000 HzWhat you hear thereThe body of voices, guitars and piano: what a small speaker plays best.
Upper midsRange2,000–4,000 HzWhat you hear thereWhere our hearing is most sensitive: consonants and the attack of guitars and snares. Too much sounds harsh.
PresenceRange4,000–6,000 HzWhat you hear thereThe clarity of a voice, and how close it sounds.
BrillianceRange6,000–20,000 HzWhat you hear thereCymbals, the hiss of “s” sounds and the airy shine on top of a mix.

What to use it for

  • Find a hum or a whistle

    A steady spike shows its exact frequency. Mains hum sits at 50 or 60 Hz and their multiples; a whistle or feedback is one sharp spike higher up.

  • Check a mix

    Turn on peak hold and play your track, then a track you like. Where the lines differ, yours has too much or too little.

  • Test speakers and rooms

    Play a test tone with the frequency generator and watch how the microphone picks it up: a speaker that can't reach a frequency, or a room that booms at one, shows in the spectrum.

  • Name a note

    The note under the loudest frequency names what's sounding. To tune an instrument, the online tuner is steadier.

Spectrum analyzer questions

Is it free? Does my sound go anywhere?

It's free, with no account. The microphone and your files are analyzed in your browser, on your device: nothing is uploaded or recorded.

Which audio files can I open?

Any your browser can play, which usually means MP3, WAV, AAC and M4A, OGG and FLAC.

How accurate is the frequency?

The spectrum is measured in bands about 6 Hz wide at the default FFT size, and the loudest frequency is worked out between them, so a steady tone reads within about a hertz. For low notes, choose a larger FFT size.

Is the level how loud it is in the room?

No. It's the level of the signal, in decibels below the loudest a recording can hold, and it depends on your microphone and its settings. Sound pressure in a room takes a calibrated sound level meter.

Does it work on a phone?

Yes, in a current mobile browser. A phone's microphone picks up little of the deepest bass, so for low frequencies an external microphone gives a truer picture.

Can I make music, not just analyze it?

Yes, with Song Maker's generator: describe the music you want and get two complete takes, as an instrumental or with vocals. New accounts get 20 free credits.

From the spectrum to your own track

Describe a sound or a genre and get two complete instrumental takes. Sign up for 20 free credits, no credit card needed.