How to use the frequency generator
Turn your volume down before you start: a steady tone can sound louder than you expect.
Set the frequency
Drag the slider, type an exact number of hertz, or step one hertz at a time with − and +. ÷2 and ×2 take it an octave down or up.
Choose a waveform
A sine wave is a pure tone. Square, triangle and sawtooth add overtones and sound brighter.
Press Play
Press “Play”, then raise the volume slowly. Everything can be changed while the tone plays, and “Stop” ends it.
Common test frequencies
Some frequencies come up again and again in audio and music. Play one to hear it, or to find out what your speakers or ears can do.
| What it's for | |
|---|---|
| 20 Hz | What it's forThe lowest pitch most people can hear, felt as much as heard. It shows how deep a subwoofer goes. |
| 50 Hz / 60 Hz | What it's forThe hum of mains electricity: 50 Hz in most of the world, 60 Hz in most of the Americas and some other countries. A hum in a recording is often one of them. |
| 440 Hz | What it's forA4, the note most instruments tune to. |
| 1,000 Hz | What it's forThe usual reference tone for testing audio equipment, and the bleep that covers words on TV. |
| 15,000 Hz | What it's forMany adults no longer hear this high: the top of our hearing drops with age. |
| 20,000 Hz | What it's forThe upper limit of human hearing, which mostly children and young people reach. |
Four waveforms, four sounds
Sine
One frequency and no overtones: the purest tone, close to a tuning fork or a whistle. Use it for tests and hearing checks.
Square
Strong odd overtones: a hollow, buzzy sound, like a clarinet's low notes or an old video game.
Triangle
Odd overtones too, but much weaker: softer than a square wave, close to a flute.
Sawtooth
Every overtone: the brightest and buzziest of the four, and the start of many synth strings and brass sounds.
Frequencies and notes
Every note is a frequency. A4, the A above middle C, is 440 Hz, and each octave up doubles it: A5 is 880 Hz, and A3 is 220 Hz. Under the frequency, the generator shows the nearest note and how many cents sharp or flat the frequency is.
To go the other way, from a note you play or sing to its frequency, use the online tuner.
Look after your ears and speakers
Start with the volume low and raise it slowly, especially in headphones. A steady tone tires the ears faster than music, so keep listening short.
Very low and very high frequencies at full volume can damage speakers, tweeters most of all. Small speakers, such as a phone's or a laptop's, can't play the lowest frequencies: you hear little or nothing, or the speaker buzzing.
Frequency generator questions
Is it free? Do I need to install anything?
It's free, with no account and nothing to install. The tone is made in your browser, on your device.
Why can't I hear some frequencies?
Your ears and your speakers both have limits. Most people hear from about 20 Hz to somewhere below 20,000 Hz, less at the top as they get older, and phone and laptop speakers play little of the lowest frequencies.
Can I test my hearing with it?
You can find roughly where your hearing stops at the top: at a low, steady volume, raise the frequency until the tone disappears. It isn't a hearing test, which an audiologist does with calibrated equipment.
Can I tune an instrument to it?
Yes. Play 440 Hz for A4, or another note's frequency, and tune until the wobble between the tone and your instrument stops. The note under the frequency tells you which note you're playing.
Can a tone damage my speakers or my ears?
Yes, if it's loud. Keep the volume low, especially in headphones and at very high or very low frequencies, and stop if it's uncomfortable.
Can I make music, not just tones?
Yes, with Song Maker's generator: describe the music you want and get two complete takes, as an instrumental or with vocals. New accounts get 20 free credits.
From a single tone to a whole track
Describe a sound or a genre and get two complete instrumental takes. Sign up for 20 free credits, no credit card needed.